Sunday, 6 July 2008

Drilling Gemstones

Drilling Gemstones

Who says gemstone drilling can only be done by experts? That’s fairly true but doing it on your own is possible. Not all gemstone wearers have the courage to put a hole through their priced possession. It’s like an all or nothing kind of challenge. Some are very fragile that with one blow, they might break. That’s why you have to be very careful when drilling those precious gemstones.

What’s the purpose of drilling?

For one, you could create your very own jewelry for decoration and fashion. Drilling can enable you to mix and match or add up to your old and boring jewelries.

The basic and essential tip on drilling is practice. You could do it on ordinary stones or gems that are made of glass. Those are really cheap and you wouldn’t regret the moment you break it.

What you’ll need is a drill press and a drill bit.

The first thing that you should do is to determine the part of the gem you’ll put a hole into. You can do this by knowing where you’ll hang or mount your gem. You have to realize that every hole drilled within the gem lessens its integrity by adding flaws to its surface.

Next, you have to fill in a container full of water. Drilling in water is the easiest and most acceptable way to for drill bits to be wet. This wouldn’t be messy and wouldn’t give you a hard time collecting and disposing fallen debris. Drills have built-in cooling feature that drips away water.

Let the drill stay still perpendicularly with the stone. Make the correct angle because if your angle is a bit off the grid, you might cause a crack either at the exit or entry point. So be accurate.

Maintain an up and down movement gently. This will enable water to move under the bit. Don’t put so much hard pressure for this will cause knocking out the gemstone off the bit.

The advisable measurement for starters is to start drilling below an inch. This is highly recommended especially when dealing with softer gems. Furthermore, softer gemstones don’t require a diamond bit.

Now that’s all done, you could wipe away the particles around your gem and look at the drill made. If you found out that you made a clean drill, maybe you could start considering an entire course on manufacturing jewelries when passion strikes you. But other than that, you could now clean your gem and wipe it dry.

One popular drilling is laser drilling. This is usually applied to hard gemstones like diamonds. The materials used for this process differs from the ordinary drilling machine. You need a thin and strong laser beam and vacuum furnace. The purpose for this drilling is to remove the impurities that are seen in diamonds and generate clarity.

Bits of advice before, during and after the drilling process:

1. Do not compromise the quality and price of the drill. While alternative drills are quite cheap and is almost exactly the same result, you can’t gamble such precious gems. Precision of clear drilling isn’t assured therefore you’re gem is at risk.

2. Use glasses that will protect your eyes from flying particles when drilling.

3. If you’re too scared to drill a straight line, let the dealers do it.

Friday, 4 July 2008

Facts and Trivia about the gemstone Turquoise

Facts and Trivia about the gemstone Turquoise

Everybody loves blue. With its calming and rejuvenating shade, this color has often been associated with the sky and water. Blue has also been the color that symbolizes royalty and tranquility. These are one of the few hundred reasons why it is not hard to love turquoise. To own jewelry made of turquoise is like looking at the open sea.

Turquoise can be mined all over the world. They have it in India, China, and US. One of the finest and most respected kinds of turquoise is the Persian turquoise.

Why the Color Change?

Perhaps it’s because of the influence of the mineral present. The higher the mineral content in the gem, the more it will be enhanced. Naturally, blue will shine within the stone if copper becomes present. But if, as it is formed, aluminum is more dominant, a green shade will appear.

All About Gemstone Formation

Turquoise is formed when percolation of water occurs inside rocks containing aluminum, copper, and other minerals found within the depths of the earth. As chemical reaction occurs, turquoise is produced. This simplified explanation for the entire process happens for millions of years and happens in suitable conditions only. Oftentimes, the climate and temperature both belonging to extremes are factors that affect molding of this gemstone.

Turquoise Dark Markings

You call those markings as the matrix. It is that piece of rock where this stone was formed into. If you tend to cut this stone, you would notice that sediments of these rocks are still suspended within the center of it. About the different color changes in the matrix, it is due to the fact that turquoise is formed among varieties of rocks. If the lining of the matrix is extended throughout the item, it is called as spider webbings for it resembles the strands of a spider web.

Justifying the Hardness of a Turquoise

When used for jewelry making, the hardness that makers require must be within the scale of 5-6. Other than that, they treat it.

Common Treatments used for Turquoise

1. Treatment for color – they usually use chemicals to change the stone’s color or elaborate it.

2. Stabilizing – this is done by infusing substances or resin inside the pores of the material.

Other treatments are used for an unusable turquoise to turn it into something usable. A lot of turquoise gemstones are either enhanced or treated. It is seldom that you find a turquoise that is all natural. But if you do, the price would not be less extravagant.

You could identify a turquoise that was made natural by looking at its features. You have to be sure that no other treatments have been made. No changes of the artificial kind should be involved.

Turquoise Care

Here are some tips on how to handle your turquoise with so much care without having the fear of neither scratching it nor breaking its viability.

• Have it hidden in a separate place away from harder stones to promote scratch reduction.

• Keep it away from extreme heat and pressure.

• Avoid any contact with dangerous chemicals that might destroy its usefulness like perfumes, cleaners and oils.

• To clean your gem, use warm water and dry it immediately. No cleansers needed.

The most important knowledge that you have to keep in mind when buying a turquoise is that you should purchase it from merchandisers who are known to save your money from fake ones.